Bohr’s Model of the Hydrogen Atom

Historically, Bohr’s model of the hydrogen atom is the very first model of atomic structure that correctly explained the radiation spectra of atomic hydrogen. The model has a special place in the history of physics because it introduced an early quantum theory, which brought about new developments in scientific thought and later culminated in the development of quantum mechanics. To understand the specifics of Bohr’s model, we must first review the nineteenth-century discoveries that prompted its formulation.

When we use a prism to analyze white light coming from the sun, several dark lines in the solar spectrum are observed (Figure 6.4.1). Solar absorption lines are called Fraunhofer lines after Joseph von Fraunhofer, who accurately measured their wavelengths. During 1854–1861, Gustav Kirchhoff and Robert Bunsen discovered that for the various chemical elements, the line emission spectrum of an element exactly matches its line absorption spectrum. The difference between the absorption spectrum and the emission spectrum is explained in Figure 6.4.2. An absorption spectrum is observed when light passes through a gas. This spectrum appears as black lines that occur only at certain wavelengths on the background of the continuous spectrum of white light (Figure 6.4.1). The missing wavelengths tell us which wavelengths of the radiation are absorbed by the gas. The emission spectrum is observed when light is emitted by a gas. This spectrum is seen as colorful lines on the black background (see Figure 6.4.3 and Figure 6.4.4). Positions of the emission lines tell us which wavelengths of the radiation are emitted by the gas. Each chemical element has its own characteristic emission spectrum. For each element, the positions of its emission lines are exactly the same as the positions of its absorption lines. This means that atoms of a specific element absorb radiation only at specific wavelengths and radiation that does not have these wavelengths is not absorbed by the element at all. This also means that the radiation emitted by atoms of each element has exactly the same wavelengths as the radiation they absorb.

Figure 6.4.1 In the solar emission spectrum in the visible range from 380 nm to 710 nm, Fraunhofer lines are observed as vertical black lines at specific spectral positions in the continuous spectrum. Highly sensitive modern instruments observe thousands of such lines.
Figure 6.4.1 In the solar emission spectrum in the visible range from 380 nm to 710 nm, Fraunhofer lines are observed as vertical black lines at specific spectral positions in the continuous spectrum. Highly sensitive modern instruments observe thousands of such lines.

Figure 6.4.2 Observation of line spectra: (a) setup to observe absorption lines; (b) setup to observe emission lines. (a) White light passes through a cold gas that is contained in a glass flask. A prism is used to separate wavelengths of the passed light. In the spectrum of the passed light, some wavelengths are missing, which are seen as black absorption lines in the continuous spectrum on the viewing screen. (b) A gas is contained in a glass discharge tube that has electrodes at its ends. At a high potential difference between the electrodes, the gas glows and the light emitted from the gas passes through the prism that separates its wavelengths. In the spectrum of the emitted light, only specific wavelengths are present, which are seen as colorful emission lines on the screen.
Figure 6.4.2 Observation of line spectra: (a) setup to observe absorption lines; (b) setup to observe emission lines. (a) White light passes through a cold gas that is contained in a glass flask. A prism is used to separate wavelengths of the passed light. In the spectrum of the passed light, some wavelengths are missing, which are seen as black absorption lines in the continuous spectrum on the viewing screen. (b) A gas is contained in a glass discharge tube that has electrodes at its ends. At a high potential difference between the electrodes, the gas glows and the light emitted from the gas passes through the prism that separates its wavelengths. In the spectrum of the emitted light, only specific wavelengths are present, which are seen as colorful emission lines on the screen.

Figure 6.4.3 The emission spectrum of atomic hydrogen: The spectral positions of emission lines are characteristic for hydrogen atoms. (credit: “Merikanto”/Wikimedia Commons)
Figure 6.4.3 The emission spectrum of atomic hydrogen: The spectral positions of emission lines are characteristic for hydrogen atoms. (credit: “Merikanto”/Wikimedia Commons)

Figure 6.4.4 The emission spectrum of atomic iron: The spectral positions of emission lines are characteristic for iron atoms.
Figure 6.4.4 The emission spectrum of atomic iron: The spectral positions of emission lines are characteristic for iron atoms.

By observing the spectra from starlight and applying additional knowledge and calculations, astronomers can determine the makeup of objects millions of light-years away. In the 1920s, Cecilia Payne-Gaposchkin undertook a thorough analysis of a collection of stellar spectra that had been organized by astronomer Annie Jump Cannon. Up until that point, many researchers believed that stars — particularly the sun — were made up of similar elements to Earth, based in part on the spectral analysis. But Payne-Gaposchkin knew that Indian physicist Meghnad Saha had developed a method to calculate stellar ionization to obtain an accurate measure of star temperatures. After applying the Saha equation to the data at hand, Payne-Gaposchkin published a monumental paper demonstrating that stars were mostly made of hydrogen and helium, and that hydrogen was the most abundant element in the universe. Initially rejected, her work was soon proven to be true.

Emission spectra of the elements have complex structures; they become even more complex for elements with higher atomic numbers. The simplest spectrum, shown in Figure 6.4.3, belongs to the hydrogen atom. Only four lines are visible to the human eye. As you read from right to left in Figure 6.4.3, these lines are: red (656 nm), called the H-\alpha line; aqua (486 nm), blue (434 nm), and violet (410 nm). The lines with wavelengths shorter than 400 nm appear in the ultraviolet part of the spectrum (Figure 6.4.3, far left) and are invisible to the human eye. There are infinitely many invisible spectral lines in the series for hydrogen.

An empirical formula to describe the positions (wavelengths) \lambda of the hydrogen emission lines in this series was discovered in 1885 by Johann Balmer. It is known as the Balmer formula:

\frac{1}{\lambda}={R}_{\text{H} }(\frac{1}{ {2}^{2} }-\frac{1}{ {n}^{2} }).

The constant {R}_{\text{H} }=1.09737\,\times\,{10}^{7}{\text{m} }^{-1} is called the Rydberg constant for hydrogen. In, the positive integer n takes on values n=3,4,5,6 for the four visible lines in this series. The series of emission lines given by the Balmer formula is called the Balmer series for hydrogen. Other emission lines of hydrogen that were discovered in the twentieth century are described by the Rydberg formula, which summarizes all of the experimental data:

\frac{1}{\lambda}={R}_{\text{H} }(\frac{1}{ {n}_{f}^{2} }-\frac{1}{ {n}_{i}^{2} }),\,\text{where}\,{n}_{i}={n}_{f}+1,{n}_{f}+2,{n}_{f}+3,...

When {n}_{f}=1, the series of spectral lines is called the Lyman series. When {n}_{f}=2, the series is called the Balmer series, and in this case, the Rydberg formula coincides with the Balmer formula. When {n}_{f}=3, the series is called the Paschen series. When {n}_{f}=4, the series is called the Brackett series. When {n}_{f}=5, the series is called the Pfund series. When {n}_{f}=6, we have the Humphreys series. As you may guess, there are infinitely many such spectral bands in the spectrum of hydrogen because {n}_{f} can be any positive integer number.

The Rydberg formula for hydrogen gives the exact positions of the spectral lines as they are observed in a laboratory; however, at the beginning of the twentieth century, nobody could explain why it worked so well. The Rydberg formula remained unexplained until the first successful model of the hydrogen atom was proposed in 1913.

Q1. What are the limits of the Lyman series? Can you see these spectral lines?

Answer: 121.5 nm and 91.1 nm; no, these spectral bands are in the ultraviolet

The key to unlocking the mystery of atomic spectra is in understanding atomic structure. Scientists have long known that matter is made of atoms. According to nineteenth-century science, atoms are the smallest indivisible quantities of matter. This scientific belief was shattered by a series of groundbreaking experiments that proved the existence of subatomic particles, such as electrons, protons, and neutrons.

The electron was discovered and identified as the smallest quantity of electric charge by J.J. Thomson in 1897 in his cathode ray experiments, also known as β-ray experiments: A \beta-ray is a beam of electrons. In 1904, Thomson proposed the first model of atomic structure, known as the “plum pudding” model, in which an atom consisted of an unknown positively charged matter with negative electrons embedded in it like plums in a pudding. Around 1900, E. Rutherford, and independently, Paul Ulrich Villard, classified all radiation known at that time as \alpha-rays, \beta-rays, and \gamma-rays (a \gamma-ray is a beam of highly energetic photons). In 1907, Rutherford and Thomas Royds used spectroscopy methods to show that positively charged particles of \alpha-radiation (called \alpha-particles) are in fact doubly ionized atoms of helium. In 1909, Rutherford, Ernest Marsden, and Hans Geiger used \alpha-particles in their famous scattering experiment that disproved Thomson’s model (see Linear Momentum and Collisions).

Register to read the full text

This page shows only part of the content. Register or log in to read it all.

Register / Log in