The analysis of simultaneity shows that Einstein’s postulates imply an important effect: Time intervals have different values when measured in different inertial frames. Suppose, for example, an astronaut measures the time it takes for a pulse of light to travel a distance perpendicular to the direction of his ship’s motion (relative to an earthbound observer), bounce off a mirror, and return (Figure 5.3.1). How does the elapsed time that the astronaut measures in the spacecraft compare with the elapsed time that an earthbound observer measures by observing what is happening in the spacecraft?
Examining this question leads to a profound result. The elapsed time for a process depends on which observer is measuring it. In this case, the time measured by the astronaut (within the spaceship where the astronaut is at rest) is smaller than the time measured by the earthbound observer (to whom the astronaut is moving). The time elapsed for the same process is different for the observers, because the distance the light pulse travels in the astronaut’s frame is smaller than in the earthbound frame, as seen in Figure 5.3.1. Light travels at the same speed in each frame, so it takes more time to travel the greater distance in the earthbound frame.
Time Dilation
Time dilation is the lengthening of the time interval between two events for an observer in an inertial frame that is moving with respect to the rest frame of the events (in which the events occur at the same location).
To quantitatively compare the time measurements in the two inertial frames, we can relate the distances in Figure 5.3.1 to each other, then express each distance in terms of the time of travel (respectively either \Delta t or \Delta\tau) of the pulse in the corresponding reference frame. The resulting equation can then be solved for \Delta t in terms of \Delta\tau.
The lengths D and L in Figure 5.3.1 are the sides of a right triangle with hypotenuse s. From the Pythagorean theorem,
{s}^{2}={D}^{2}+{L}^{2}.The lengths 2s and 2L are, respectively, the distances that the pulse of light and the spacecraft travel in time \Delta t in the earthbound observer’s frame. The length 2D is the distance that the light pulse travels in time \Delta\tau in the astronaut’s frame. This gives us three equations:
2s=c\Delta t;2L=v\Delta t;2D=c\Delta\tau.Note that we used Einstein’s second postulate by taking the speed of light to be c in both inertial frames. We substitute these results into the previous expression from the Pythagorean theorem:
\begin{aligned}{s}^{2} & = & {D}^{2}+{L}^{2} \\ {(c\frac{\Delta t}{2})}^{2} & = & {(c\frac{\Delta\tau}{2})}^{2}+{(v\frac{\Delta t}{2})}^{2}.\end{aligned}Then we rearrange to obtain
{(c\Delta t)}^{2} - {(v\Delta t)}^{2}={(c\Delta\tau)}^{2}.Finally, solving for \Delta t in terms of \Delta\tau gives us
\Delta t=\frac{\Delta\tau}{\sqrt{1- {(v\text{/}c)}^{2} } }.This is equivalent to
\Delta t=\gamma\Delta\tau,where \gamma is the relativistic factor (often called the Lorentz factor) given by
\gamma=\frac{1}{\sqrt{1-\frac{ {v}^{2} }{ {c}^{2} } } }and v and c are the speeds of the moving observer and light, respectively.
Note the asymmetry between the two measurements. Only one of them is a measurement of the time interval between two events—the emission and arrival of the light pulse—at the same position. It is a measurement of the time interval in the rest frame of a single clock. The measurement in the earthbound frame involves comparing the time interval between two events that occur at different locations. The time interval between events that occur at a single location has a separate name to distinguish it from the time measured by the earthbound observer, and we use the separate symbol \Delta\tau to refer to it throughout this chapter.
Proper Time
Register to read the full text
This page shows only part of the content. Register or log in to read it all.
Register / Log in