Intensity in Single-Slit Diffraction

To calculate the intensity of the diffraction pattern, we follow the phasor method used for calculations with ac circuits in Alternating-Current Circuits. If we consider that there are N Huygens sources across the slit shown in, with each source separated by a distance a/N from its adjacent neighbors, the path difference between waves from adjacent sources reaching the arbitrary point P on the screen is (a\text{/}N)\,\text{sin}\,\theta. This distance is equivalent to a phase difference of (2\pi a\text{/}\lambda N)\,\text{sin}\,\theta. The phasor diagram for the waves arriving at the point whose angular position is \theta is shown in Figure 4.2.1. The amplitude of the phasor for each Huygens wavelet is \Delta{E}_{0}, the amplitude of the resultant phasor is E, and the phase difference between the wavelets from the first and the last sources is

\phi=(\frac{2\pi}{\lambda})a\,\text{sin}\,\theta.

With N\to\infty, the phasor diagram approaches a circular arc of length N\Delta{E}_{0} and radius r. Since the length of the arc is N\Delta{E}_{0} for any \phi, the radius r of the arc must decrease as \phi increases (or equivalently, as the phasors form tighter spirals).

Figure 4.2.1 (a) Phasor diagram corresponding to the angular position <span class=\theta in the single-slit diffraction pattern. The phase difference between the wavelets from the first and last sources is \phi=(2\pi\text{/}\lambda)a\,\text{sin}\,\theta. (b) The geometry of the phasor diagram." loading="lazy"/>
Figure 4.2.1 (a) Phasor diagram corresponding to the angular position \theta in the single-slit diffraction pattern. The phase difference between the wavelets from the first and last sources is \phi=(2\pi\text{/}\lambda)a\,\text{sin}\,\theta. (b) The geometry of the phasor diagram.

The phasor diagram for \phi=0 (the center of the diffraction pattern) is shown in Figure 4.2.2(a) using N=30. In this case, the phasors are laid end to end in a straight line of length N\Delta{E}_{0}, the radius r goes to infinity, and the resultant has its maximum value E=N\Delta{E}_{0}. The intensity of the light can be obtained using the relation I=\frac{1}{2}c{\varepsilon}_{0}{E}^{2} from Electromagnetic Waves. The intensity of the maximum is then

Register to read the full text

This page shows only part of the content. Register or log in to read it all.

Register / Log in