Microscopes and Telescopes in University Physics

Microscopes and telescopes are major instruments that have contributed hugely to our current understanding of the micro- and macroscopic worlds. The invention of these devices led to numerous discoveries in disciplines such as physics, astronomy, and biology, to name a few. In this section, we explain the basic physics that make these instruments work.

Microscopes

Although the eye is marvelous in its ability to see objects large and small, it obviously is limited in the smallest details it can detect. The desire to see beyond what is possible with the naked eye led to the use of optical instruments. We have seen that a simple convex lens can create a magnified image, but it is hard to get large magnification with such a lens. A magnification greater than 5\,\times\, is difficult without distorting the image. To get higher magnification, we can combine the simple magnifying glass with one or more additional lenses. In this section, we examine microscopes that enlarge the details that we cannot see with the naked eye.

Microscopes were first developed in the early 1600s by eyeglass makers in The Netherlands and Denmark. The simplest compound microscope is constructed from two convex lenses (Figure 2.8.1). The objective lens is a convex lens of short focal length (i.e., high power) with typical magnification from 5\,\times\, to 100\,\times\,. The eyepiece, also referred to as the ocular, is a convex lens of longer focal length.

The purpose of a microscope is to create magnified images of small objects, and both lenses contribute to the final magnification. Also, the final enlarged image is produced sufficiently far from the observer to be easily viewed, since the eye cannot focus on objects or images that are too close (i.e., closer than the near point of the eye).

Figure 2.8.1 Current compound microscopes like this one use many lenses to create a focused image; however, we will simplify this into one single convex lens for the eyepiece and one single convex lens for the objective lens.
Figure 2.8.1 Current compound microscopes like this one use many lenses to create a focused image; however, we will simplify this into one single convex lens for the eyepiece and one single convex lens for the objective lens.

To see how the microscope in Figure 2.8.1 forms an image, consider its two lenses in succession. The object is just beyond the focal length {f}^{\text{obj} } of the objective lens, producing a real, inverted image that is larger than the object. This first image serves as the object for the second lens, or eyepiece. The eyepiece is positioned so that the first image is within its focal length {f}^{\text{eye} }, so that it can further magnify the image. In a sense, it acts as a magnifying glass that magnifies the intermediate image produced by the objective. The image produced by the eyepiece is a magnified virtual image. The final image remains inverted but is farther from the observer than the object, making it easy to view.

The eye views the virtual image created by the eyepiece, which serves as the object for the lens in the eye. The virtual image formed by the eyepiece is well outside the focal length of the eye, so the eye forms a real image on the retina.

The magnification of the microscope is the product of the linear magnification {m}^{\text{obj} } by the objective and the angular magnification {M}^{\text{eye} } by the eyepiece. These are given by

\begin{aligned}{m}^{\text{obj} } & =\text{-}\frac{ {d}_{\text{i} }^{\text{obj} } }{ {d}_{\text{o} }^{\text{obj} } }\approx-\frac{ {d}_{\text{i} }^{\text{obj} } }{ {f}^{\text{obj} } }\,\text{(linear magnification by objective)} \\ {M}^{\text{eye} } & =1\,+\,\frac{25\,\text{cm} }{ {f}^{\text{eye} } }\,\text{(angular magnification by eyepiece)}\end{aligned}

Here, {f}^{\text{obj} } and {f}^{\text{eye} } are the focal lengths of the objective and the eyepiece, respectively. We assume that the object and objective focal length are nearly equal and that the final image is formed at the near point of the eye, providing the largest magnification. Note that the angular magnification of the eyepiece is the same as obtained earlier for the simple magnifying glass. This should not be surprising, because the eyepiece is essentially a magnifying glass, and the same physics applies here. The net magnification {M}_{\text{net} } of the compound microscope is the product of the linear magnification of the objective and the angular magnification of the eyepiece:

{M}_{\text{net} }={m}^{\text{obj} }{M}^{\text{eye} }=\text{-}\frac{ {d}_{\text{i} }^{\text{obj} }({f}^{\text{eye} }+25\,\text{cm})}{ {f}^{\text{obj} }{f}^{\text{eye} } }.

Figure 2.8.2 A compound microscope is composed of two lenses: an objective and an eyepiece. The objective forms the first image, which is larger than the object. This first image is inside the focal length of the eyepiece and serves as the object for the eyepiece. The eyepiece forms final image that is further magnified.
Figure 2.8.2 A compound microscope is composed of two lenses: an objective and an eyepiece. The objective forms the first image, which is larger than the object. This first image is inside the focal length of the eyepiece and serves as the object for the eyepiece. The eyepiece forms final image that is further magnified.

We now calculate the magnifying power of a microscope when the image is at infinity, as shown in Figure 2.8.2, because this makes for the most relaxed viewing. The magnifying power of the microscope is the product of linear magnification {m}^{\text{obj} } of the objective and the angular magnification {M}^{\text{eye} } of the eyepiece. The magnification of the objective can be obtained from the thin-lens equation for magnification, which is

{m}^{\text{obj} }=\text{-}\frac{ {d}_{\text{i} }^{\text{obj} } }{ {d}_{\text{o} }^{\text{obj} } }

If the final image is at infinity, then the image created by the objective must be located at the focal point of the eyepiece. This may be seen by considering the thin-lens equation with {d}_{\text{i} }=\infty or by recalling that rays that pass through the focal point exit the lens parallel to each other, which is equivalent to focusing at infinity. For many microscopes, the distance between the image-side focal point of the objective and the object-side focal point of the eyepiece is standardized at L=16\,\text{cm}. This distance is called the tube length of the microscope. If the length of the compound microscope L is much greater than the focal length of the objective, we can substitute L in for diobj to get

{m}^{\text{obj} }=\frac{L}{ {f}^{\text{obj} } }=\frac{16\,\text{cm} }{ {f}^{\text{obj} } }.

We now need to calculate the angular magnification of the eyepiece with the image at infinity. To do so, we take the ratio of the angle {\theta}_{\text{image} } subtended by the image to the angle {\theta}_{\text{object} } subtended by the object at the near point of the eye (this is the closest that the unaided eye can view the object, and thus this is the position where the object will form the largest image on the retina of the unaided eye). Using Figure 2.8.2 and working in the small-angle approximation, we have {\theta}_{\text{image} }\approx{h}_{\text{i} }^{\text{obj} }\text{/}{f}^{\text{eye} } and {\theta}_{\text{object} }\approx{h}_{\text{i} }^{\text{obj} }\text{/}25\,\text{cm}, where {h}_{\text{i} }^{\text{obj} } is the height of the image formed by the objective, which is the object of the eyepiece. Thus, the angular magnification of the eyepiece is

{M}^{\text{eye} }=\frac{ {\theta}_{\text{image} } }{ {\theta}_{\text{object} } }=\frac{ {h}_{\text{i} }^{\text{obj} } }{ {f}^{\text{eye} } }\,\frac{25\,\text{cm} }{ {h}_{\text{i} }^{\text{obj} } }=\frac{25\,\text{cm} }{ {f}^{\text{eye} } }.

The net magnifying power of the compound microscope with the image at infinity is therefore

{M}_{\text{net} }={m}^{\text{obj} }{M}^{\text{eye} }=\text{-}\frac{(16\,\text{cm})(25\,\text{cm})}{ {f}^{\text{obj} }{f}^{\text{eye} } }.

The focal distances must be in centimeters. The minus sign indicates that the final image is inverted. Note that the only variables in the equation are the focal distances of the eyepiece and the objective, which makes this equation particularly useful.

Telescopes

Telescopes are meant for viewing distant objects and produce an image that is larger than the image produced in the unaided eye. Telescopes gather far more light than the eye, allowing dim objects to be observed with greater magnification and better resolution. Telescopes were invented around 1600, and Galileo was the first to use them to study the heavens, with monumental consequences. He observed the moons of Jupiter, the craters and mountains on the moon, the details of sunspots, and the fact that the Milky Way is composed of a vast number of individual stars.

Figure 2.8.3 (a) Galileo made telescopes with a convex objective and a concave eyepiece. These produce an upright image and are used in spyglasses. (b) Most simple refracting telescopes have two convex lenses. The objective forms a real, inverted image at (or just within) the focal plane of the eyepiece. This image serves as the object for the eyepiece. The eyepiece forms a virtual, inverted image that is magnified.
Figure 2.8.3 (a) Galileo made telescopes with a convex objective and a concave eyepiece. These produce an upright image and are used in spyglasses. (b) Most simple refracting telescopes have two convex lenses. The objective forms a real, inverted image at (or just within) the focal plane of the eyepiece. This image serves as the object for the eyepiece. The eyepiece forms a virtual, inverted image that is magnified.

Part (a) of Figure 2.8.3 shows a refracting telescope made of two lenses. The first lens, called the objective, forms a real image within the focal length of the second lens, which is called the eyepiece. The image of the objective lens serves as the object for the eyepiece, which forms a magnified virtual image that is observed by the eye. This design is what Galileo used to observe the heavens.

Although the arrangement of the lenses in a refracting telescope looks similar to that in a microscope, there are important differences. In a telescope, the real object is far away and the intermediate image is smaller than the object. In a microscope, the real object is very close and the intermediate image is larger than the object. In both the telescope and the microscope, the eyepiece magnifies the intermediate image; in the telescope, however, this is the only magnification.

Register to read the full text

This page shows only part of the content. Register or log in to read it all.

Register / Log in