RLC Series Circuits with AC

The ac circuit shown in Figure 15.3.1, called an RLC series circuit, is a series combination of a resistor, capacitor, and inductor connected across an ac source. It produces an emf of

v(t)={V}_{0}\,\text{sin}\,\omega t.

Figure 15.3.1 (a) An RLC series circuit. (b) A comparison of the generator output voltage and the current. The value of the phase difference <span class=\phi depends on the values of R, C, and L." loading="lazy"/>
Figure 15.3.1 (a) An RLC series circuit. (b) A comparison of the generator output voltage and the current. The value of the phase difference \phi depends on the values of R, C, and L.

Since the elements are in series, the same current flows through each element at all points in time. The relative phase between the current and the emf is not obvious when all three elements are present. Consequently, we represent the current by the general expression

i(t)={I}_{0}\,\text{sin}\,(\omega t-\phi),

where {I}_{0} is the current amplitude and \phi is the phase angle between the current and the applied voltage. The phase angle is thus the amount by which the voltage and current are out of phase with each other in a circuit. Our task is to find {I}_{0}\,\text{and}\,\phi.

A phasor diagram involving i(t),{v}_{R}(t),{v}_{C}(t),\,\text{and}\,{v}_{L}(t) is helpful for analyzing the circuit. As shown in Figure 15.3.2, the phasor representing {v}_{R}(t) points in the same direction as the phasor for i(t); its amplitude is {V}_{R}={I}_{0}R. The {v}_{C}(t) phasor lags the i(t) phasor by \pi\text{/}2 rad and has the amplitude {V}_{C}={I}_{0}{X}_{C}. The phasor for {v}_{L}(t) leads the i(t) phasor by \pi\text{/}2 rad and has the amplitude {V}_{L}={I}_{0}{X}_{L}.

Figure 15.3.2 The phasor diagram for the RLC series circuit of Figure 15.3.1.
Figure 15.3.2 The phasor diagram for the RLC series circuit of Figure 15.3.1.

At any instant, the voltage across the RLC combination is {v}_{R}(t)+{v}_{L}(t)+{v}_{C}(t)=v(t), the emf of the source. Since a component of a sum of vectors is the sum of the components of the individual vectors—for example, {(A+B)}_{y}={A}_{y}+{B}_{y} —the projection of the vector sum of phasors onto the vertical axis is the sum of the vertical projections of the individual phasors. Hence, if we add vectorially the phasors representing {v}_{R}(t),{v}_{L}(t),\,\text{and}\,{v}_{C}(t) and then find the projection of the resultant onto the vertical axis, we obtain

Register to read the full text

This page shows only part of the content. Register or log in to read it all.

Register / Log in