Simple AC Circuits

In this section, we study simple models of ac voltage sources connected to three circuit components: (1) a resistor, (2) a capacitor, and (3) an inductor. The power furnished by an ac voltage source has an emf given by

v(t)={V}_{0}\,\text{sin}\,\omega t,

as shown in Figure 15.2.1. This sine function assumes we start recording the voltage when it is v=0\,\text{V} at a time of t=0\,\text{s}\text{.} A phase constant may be involved that shifts the function when we start measuring voltages, similar to the phase constant in the waves we studied in Waves. However, because we are free to choose when we start examining the voltage, we can ignore this phase constant for now. We can measure this voltage across the circuit components using one of two methods: (1) a quantitative approach based on our knowledge of circuits, or (2) a graphical approach that is explained in the coming sections.

Figure 15.2.1 (a) The output <span class=v(t)={V}_{0}\,\text{sin}\,\omega t of an ac generator. (b) Symbol used to represent an ac voltage source in a circuit diagram." loading="lazy"/>
Figure 15.2.1 (a) The output v(t)={V}_{0}\,\text{sin}\,\omega t of an ac generator. (b) Symbol used to represent an ac voltage source in a circuit diagram.

Resistor

First, consider a resistor connected across an ac voltage source. From Kirchhoff’s loop rule, the instantaneous voltage across the resistor of Figure 15.2.2(a) is

{v}_{R}(t)={V}_{0}\,\text{sin}\,\omega t

and the instantaneous current through the resistor is

{i}_{R}(t)=\frac{ {v}_{R}(t)}{R}=\frac{ {V}_{0} }{R}\,\text{sin}\,\omega t={I}_{0}\,\text{sin}\,\omega t.

Figure 15.2.2 (a) A resistor connected across an ac voltage source. (b) The current <span class={i}_{R}(t) through the resistor and the voltage {v}_{R}(t) across the resistor. The two quantities are in phase." loading="lazy"/>
Figure 15.2.2 (a) A resistor connected across an ac voltage source. (b) The current {i}_{R}(t) through the resistor and the voltage {v}_{R}(t) across the resistor. The two quantities are in phase.

Here, {I}_{0}={V}_{0}\text{/}R is the amplitude of the time-varying current. Plots of {i}_{R}(t) and {v}_{R}(t) are shown in Figure 15.2.2(b). Both curves reach their maxima and minima at the same times, that is, the current through and the voltage across the resistor are in phase.

Graphical representations of the phase relationships between current and voltage are often useful in the analysis of ac circuits. Such representations are called phasor diagrams. The phasor diagram for {i}_{R}(t) is shown in Figure 15.2.3(a), with the current on the vertical axis. The arrow (or phasor) is rotating counterclockwise at a constant angular frequency \omega, so we are viewing it at one instant in time. If the length of the arrow corresponds to the current amplitude {I}_{0}, the projection of the rotating arrow onto the vertical axis is {i}_{R}(t)={I}_{0}\,\text{sin}\,\omega t, which is the instantaneous current.

Figure 15.2.3 (a) The phasor diagram representing the current through the resistor of Figure 15.2.2. (b) The phasor diagram representing both <span class={i}_{R}(t) and {v}_{R}(t)." loading="lazy"/>
Figure 15.2.3 (a) The phasor diagram representing the current through the resistor of Figure 15.2.2. (b) The phasor diagram representing both {i}_{R}(t) and {v}_{R}(t).

Register to read the full text

This page shows only part of the content. Register or log in to read it all.

Register / Log in