Motors are the most common application of magnetic force on current-carrying wires. Motors contain loops of wire in a magnetic field. When current is passed through the loops, the magnetic field exerts torque on the loops, which rotates a shaft. Electrical energy is converted into mechanical work in the process. Once the loop’s surface area is aligned with the magnetic field, the direction of current is reversed, so there is a continual torque on the loop (Figure 11.5.1). This reversal of the current is done with commutators and brushes. The commutator is set to reverse the current flow at set points to keep continual motion in the motor. A basic commutator has three contact areas to avoid and dead spots where the loop would have zero instantaneous torque at that point. The brushes press against the commutator, creating electrical contact between parts of the commutator during the spinning motion.
In a uniform magnetic field, a current-carrying loop of wire, such as a loop in a motor, experiences both forces and torques on the loop. Figure 11.5.2 shows a rectangular loop of wire that carries a current I and has sides of lengths a and b. The loop is in a uniform magnetic field: \mathbf{\vec{B} }=B\mathbf{\hat{j} }. The magnetic force on a straight current-carrying wire of length l is given by I\mathbf{\vec{l} }\,\times\,\mathbf{\vec{B} }. To find the net force on the loop, we have to apply this equation to each of the four sides. The force on side 1 is
Register to read the full text
This page shows only part of the content. Register or log in to read it all.
Register / Log in