RC Circuits

When you use a flash camera, it takes a few seconds to charge the capacitor that powers the flash. The light flash discharges the capacitor in a tiny fraction of a second. Why does charging take longer than discharging? This question and several other phenomena that involve charging and discharging capacitors are discussed in this module.

Circuits with Resistance and Capacitance

An RC circuit is a circuit containing resistance and capacitance. As presented in Capacitance, the capacitor is an electrical component that stores electric charge, storing energy in an electric field.

Figure 10.5.1(a) shows a simple RC circuit that employs a dc (direct current) voltage source \varepsilon, a resistor R, a capacitor C, and a two-position switch. The circuit allows the capacitor to be charged or discharged, depending on the position of the switch. When the switch is moved to position A, the capacitor charges, resulting in the circuit in part (b). When the switch is moved to position B, the capacitor discharges through the resistor.

Figure 10.5.1 (a) An RC circuit with a two-pole switch that can be used to charge and discharge a capacitor. (b) When the switch is moved to position <span class=A, the circuit reduces to a simple series connection of the voltage source, the resistor, the capacitor, and the switch. (c) When the switch is moved to position B, the circuit reduces to a simple series connection of the resistor, the capacitor, and the switch. The voltage source is removed from the circuit." loading="lazy"/>
Figure 10.5.1 (a) An RC circuit with a two-pole switch that can be used to charge and discharge a capacitor. (b) When the switch is moved to position A, the circuit reduces to a simple series connection of the voltage source, the resistor, the capacitor, and the switch. (c) When the switch is moved to position B, the circuit reduces to a simple series connection of the resistor, the capacitor, and the switch. The voltage source is removed from the circuit.

Charging a Capacitor

We can use Kirchhoff’s loop rule to understand the charging of the capacitor. This results in the equation \varepsilon- {V}_{R} - {V}_{c}=0. This equation can be used to model the charge as a function of time as the capacitor charges. Capacitance is defined as C=q\text{/}V, so the voltage across the capacitor is {V}_{C}=\frac{q}{C}. Using Ohm’s law, the potential drop across the resistor is {V}_{R}=IR, and the current is defined as I=dq\text{/}dt.

\begin{aligned}\varepsilon- {V}_{R} - {V}_{c}=0, \\ \varepsilon-IR-\frac{q}{C}=0, \\ \varepsilon-R\frac{dq}{dt}-\frac{q}{C}=0.\end{aligned}

This differential equation can be integrated to find an equation for the charge on the capacitor as a function of time.

\begin{aligned} \\ \\ \varepsilon-R\frac{dq}{dt}-\frac{q}{C}=0, \\ \frac{dq}{dt}=\frac{\varepsilon C-q}{RC}, \\ \overset{q}{\underset{0}{\int} }\frac{dq}{\varepsilon C-q}=\frac{1}{RC}\overset{t}{\underset{0}{\int} }dt.\end{aligned}

Let u=\varepsilon C-q, then du=\text{-}dq. The result is

\begin{aligned} \\ \\ \\ \\ \\ -\overset{q}{\underset{0}{\int} }\frac{du}{u}=\frac{1}{RC}\overset{t}{\underset{0}{\int} }dt, \\ \text{ln}(\frac{\varepsilon C-q}{\varepsilon C})=-\frac{1}{RC}t, \\ \frac{\varepsilon C-q}{\varepsilon C}={e}^{\text{-}\frac{t}{RC} }.\end{aligned}

Simplifying results in an equation for the charge on the charging capacitor as a function of time:

Register to read the full text

This page shows only part of the content. Register or log in to read it all.

Register / Log in