Electromotive Force

Battery life is an essential consideration for every user of mobile phones, laptop computers, and electric vehicles. The reliability of a battery and its ability to hold a charge can impact every aspect of our day. For many people, battery reliability is even more important.

Each year, over 300,000 implantable cardioverter defibrillators (ICDs) are surgically provided to people at risk of sudden and life-threatening arrythmia, such as a heart beating too fast or irregularly. Similar to (and sometimes combined with) pacemakers, ICDs monitor patients' hearts and deliver electrical shocks to correct iregular activity. Since they must function properly at all times, battery life and reliability are critically important. Early ICDs had minimal power output and brief battery lives, which required frequent surgical replacement and made them impractical.

Esther Sans Takeuchi began addressing this problem in the 1980s, when she experimented with new chemical compositions and designs to increase the power and reliability of ICD and similar batteries. Her initial lithium-silver vanadium oxide batteries increased longevity and power output, making ICDs a viable option for hundreds of thousands of people. Takeuchi eventually became the chief scientist at the Department of Energy's Brookhaven National Laboratory, and her continued work has impacted a wide array of medical technologies, electric vehicles, and other battery applications.

In this section, we examine the principles of battery power and similar voltage sources, particularly the energy creation and internal resistance.

Introduction to Electromotive Force

Voltage has many sources, a few of which are shown in Figure 10.1.1. All such devices create a potential difference and can supply current if connected to a circuit. A special type of potential difference is known as electromotive force (emf). The emf is not a force at all, but the term ‘electromotive force’ is used for historical reasons. It was coined by Alessandro Volta in the 1800s, when he invented the first battery, also known as the voltaic pile. Because the electromotive force is not a force, it is common to refer to these sources simply as sources of emf (pronounced as the letters “ee-em-eff”), instead of sources of electromotive force.

Figure 10.1.1 A variety of voltage sources. (a) The Brazos Wind Farm in Fluvanna, Texas; (b) the Krasnoyarsk Dam in Russia; (c) a solar farm; (d) a group of nickel metal hydride batteries. The voltage output of each device depends on its construction and load. The voltage output equals emf only if there is no load. (credit a: modification of work by Stig Nygaard; credit b: modification of work by "vadimpl"/Wikimedia Commons; credit c: modification of work by "The tdog"/Wikimedia Commons; credit d: modification of work by "Itrados"/Wikimedia Commons)
Figure 10.1.1 A variety of voltage sources. (a) The Brazos Wind Farm in Fluvanna, Texas; (b) the Krasnoyarsk Dam in Russia; (c) a solar farm; (d) a group of nickel metal hydride batteries. The voltage output of each device depends on its construction and load. The voltage output equals emf only if there is no load. (credit a: modification of work by Stig Nygaard; credit b: modification of work by "vadimpl"/Wikimedia Commons; credit c: modification of work by "The tdog"/Wikimedia Commons; credit d: modification of work by "Itrados"/Wikimedia Commons)

If the electromotive force is not a force at all, then what is the emf and what is a source of emf? To answer these questions, consider a simple circuit of a 12-V lamp attached to a 12-V battery, as shown in Figure 10.1.2. The battery can be modeled as a two-terminal device that keeps one terminal at a higher electric potential than the second terminal. The higher electric potential is sometimes called the positive terminal and is labeled with a plus sign. The lower-potential terminal is sometimes called the negative terminal and labeled with a minus sign. This is the source of the emf.

Figure 10.1.2 A source of emf maintains one terminal at a higher electric potential than the other terminal, acting as a source of current in a circuit.
Figure 10.1.2 A source of emf maintains one terminal at a higher electric potential than the other terminal, acting as a source of current in a circuit.

When the emf source is not connected to the lamp, there is no net flow of charge within the emf source. Once the battery is connected to the lamp, charges flow from one terminal of the battery, through the lamp (causing the lamp to light), and back to the other terminal of the battery. If we consider positive (conventional) current flow, positive charges leave the positive terminal, travel through the lamp, and enter the negative terminal.

Positive current flow is useful for most of the circuit analysis in this chapter, but in metallic wires and resistors, electrons contribute the most to current, flowing in the opposite direction of positive current flow. Therefore, it is more realistic to consider the movement of electrons for the analysis of the circuit in Figure 10.1.2. The electrons leave the negative terminal, travel through the lamp, and return to the positive terminal. In order for the emf source to maintain the potential difference between the two terminals, negative charges (electrons) must be moved from the positive terminal to the negative terminal. The emf source acts as a charge pump, moving negative charges from the positive terminal to the negative terminal to maintain the potential difference. This increases the potential energy of the charges and, therefore, the electric potential of the charges.

Register to read the full text

This page shows only part of the content. Register or log in to read it all.

Register / Log in