In an electric circuit, electrical energy is continuously converted into other forms of energy. For example, when a current flows in a conductor, electrical energy is converted into thermal energy within the conductor. The electrical field, supplied by the voltage source, accelerates the free electrons, increasing their kinetic energy for a short time. This increased kinetic energy is converted into thermal energy through collisions with the ions of the lattice structure of the conductor. In Work and Kinetic Energy, we defined power as the rate at which work is done by a force measured in watts. Power can also be defined as the rate at which energy is transferred. In this section, we discuss the time rate of energy transfer, or power, in an electric circuit.
Power is associated by many people with electricity. Power transmission lines might come to mind. We also think of light bulbs in terms of their power ratings in watts. What is the expression for electric power?
Let us compare a 25-W bulb with a 60-W bulb (Figure 9.5.1(a)). The 60-W bulb glows brighter than the 25-W bulb. Although it is not shown, a 60-W light bulb is also warmer than the 25-W bulb. The heat and light is produced from the conversion of electrical energy. The kinetic energy lost by the electrons in collisions is converted into the internal energy of the conductor and radiation. How are voltage, current, and resistance related to electric power?
To calculate electric power, consider a voltage difference existing across a material (Figure 9.5.2). The electric potential {V}_{1} is higher than the electric potential at {V}_{2}, and the voltage difference is \Delta V={V}_{2} - {V}_{1}. As discussed in Electric Potential, an electrical field exists between the two potentials, which points from the higher potential to the lower potential. Recall that the electrical potential is defined as the potential energy per charge, V=U\text{/}q, and the charge Q loses potential energy moving through the potential difference.
If the charge is positive, the charge experiences a force due to the electrical field \mathbf{\vec{F} }=m\mathbf{\vec{a} }=Q\mathbf{\vec{E} }. This force is necessary to keep the charge moving. This force does not act to accelerate the charge through the entire distance \Delta L because of the interactions of the charge with atoms and free electrons in the material. The speed, and therefore the kinetic energy, of the charge do not increase during the entire trip across \Delta L, and charge passing through area {A}_{2} has the same drift velocity {v}_{\text{d} } as the charge that passes through area {A}_{1}. However, work is done on the charge, by the electrical field, which changes the potential energy. Since the change in the electrical potential difference is negative, the electrical field is found to be
E=-\frac{({V}_{2} - {V}_{1})}{\Delta L}=-\frac{\Delta V}{\Delta L}.The work done on the charge is equal to the electric force times the length at which the force is applied,
W=F\Delta L=(QE)\Delta L=Q(-\frac{\Delta V}{\Delta L})\Delta L= -Q\Delta V=\text{-}\Delta U.The charge moves at a drift velocity {v}_{\text{d} } so the work done on the charge results in a loss of potential energy, but the average kinetic energy remains constant. The lost electrical potential energy appears as thermal energy in the material. On a microscopic scale, the energy transfer is due to collisions between the charge and the molecules of the material, which leads to an increase in temperature in the material. The loss of potential energy results in an increase in the temperature of the material, which is dissipated as radiation. In a resistor, it is dissipated as heat, and in a light bulb, it is dissipated as heat and light.
The power dissipated by the material as heat and light is equal to the time rate of change of the work:
P=\frac{\Delta U}{\Delta t}=\frac{Q\Delta V}{\Delta t}=IV.With a resistor, the voltage drop across the resistor is dissipated as heat. Ohm’s law states that the voltage across the resistor is equal to the current times the resistance, V=IR. The power dissipated by the resistor is therefore
P=IV=I(IR)={I}^{2}R\;\text{or}\;P=IV=(\frac{V}{R})V=\frac{ {V}^{2} }{R}.If a resistor is connected to a battery, the power dissipated as radiant energy by the wires and the resistor is equal to P=IV={I}^{2}R=\frac{ {V}^{2} }{R}. The power supplied from the battery is equal to current times the voltage, P=IV.
Electric Power
The electric power gained or lost by any device has the form
P=IV.The power dissipated by a resistor has the form
Register to read the full text
This page shows only part of the content. Register or log in to read it all.
Register / Log in