Gauss’s law is very helpful in determining expressions for the electric field, even though the law is not directly about the electric field; it is about the electric flux. It turns out that in situations that have certain symmetries (spherical, cylindrical, or planar) in the charge distribution, we can deduce the electric field based on knowledge of the electric flux. In these systems, we can find a Gaussian surface S over which the electric field has constant magnitude. Furthermore, if \vec{\mathbf{\text{E} } } is parallel to \mathbf{\hat{\text{n} } } everywhere on the surface, then \vec{\mathbf{\text{E} } }\cdot\mathbf{\hat{\text{n} } }=E. (If \vec{\mathbf{\text{E} } } and \mathbf{\hat{\text{n} } } are antiparallel everywhere on the surface, then \vec{\mathbf{\text{E} } }\cdot\mathbf{\hat{\text{n} } }=\text{-}E.) Gauss’s law then simplifies to
\Phi={∮}_{S}\vec{\mathbf{\text{E} } }\cdot\mathbf{\hat{\text{n} } }\,dA=E{∮}_{S}\,dA=EA=\frac{ {q}_{\text{enc} } }{ {\varepsilon}_{0} },where A is the area of the surface. Note that these symmetries lead to the transformation of the flux integral into a product of the magnitude of the electric field and an appropriate area. When you use this flux in the expression for Gauss’s law, you obtain an algebraic equation that you can solve for the magnitude of the electric field, which looks like
E\sim\frac{ {q}_{\text{enc} } }{ {\varepsilon}_{0}\,\text{area} }.The direction of the electric field at point P is obtained from the symmetry of the charge distribution and the type of charge in the distribution. Therefore, Gauss’s law can be used to determine \vec{\mathbf{\text{E} } }. Here is a summary of the steps we will follow:
Gauss’s Law
Basically, there are only three types of symmetry that allow Gauss’s law to be used to deduce the electric field. They are
To exploit the symmetry, we perform the calculations in appropriate coordinate systems and use the right kind of Gaussian surface for that symmetry, applying the remaining four steps.
A charge distribution has spherical symmetry if the density of charge depends only on the distance from a point in space and not on the direction. In other words, if you rotate the system, it doesn’t look different. For instance, if a sphere of radius R is uniformly charged with charge density {\rho}_{0} then the distribution has spherical symmetry (Figure 6.3.1(a)). On the other hand, if a sphere of radius R is charged so that the top half of the sphere has uniform charge density {\rho}_{1} and the bottom half has a uniform charge density {\rho}_{2}\ne{\rho}_{1}, then the sphere does not have spherical symmetry because the charge density depends on the direction (Figure 6.3.1(b)). Thus, it is not the shape of the object but rather the shape of the charge distribution that determines whether or not a system has spherical symmetry.
Figure 6.3.1(c) shows a sphere with four different shells, each with its own uniform charge density. Although this is a situation where charge density in the full sphere is not uniform, the charge density function depends only on the distance from the center and not on the direction. Therefore, this charge distribution does have spherical symmetry.
One good way to determine whether or not your problem has spherical symmetry is to look at the charge density function in spherical coordinates, \rho(r,\theta,\phi). If the charge density is only a function of r, that is \rho=\rho(r), then you have spherical symmetry. If the density depends on \theta or \phi, you could change it by rotation; hence, you would not have spherical symmetry.
In all spherically symmetrical cases, the electric field at any point must be radially directed, because the charge and, hence, the field must be invariant under rotation. Therefore, using spherical coordinates with their origins at the center of the spherical charge distribution, we can write down the expected form of the electric field at a point P located at a distance r from the center:
\text{Spherical symmetry:}\,{\mathbf{\vec{\text{E} } } }_{P}={E}_{P}(r)\mathbf{\hat{\text{r} } },where \mathbf{\hat{\text{r} } } is the unit vector pointed in the direction from the origin to the field point P. The radial component {E}_{P} of the electric field can be positive or negative. When {E}_{P}>0, the electric field at P points away from the origin, and when {E}_{P}<0, the electric field at P points toward the origin.
We can now use this form of the electric field to obtain the flux of the electric field through the Gaussian surface. For spherical symmetry, the Gaussian surface is a closed spherical surface that has the same center as the center of the charge distribution. Thus, the direction of the area vector of an area element on the Gaussian surface at any point is parallel to the direction of the electric field at that point, assuming the net charge is positive resulting in both vectors pointing radially directed outward (Figure 6.3.2). If the net charge was negative inside the Gaussian surface, the electric field would point antiparallel to the area vector.
The magnitude of the electric field \vec{\mathbf{\text{E} } } must be the same everywhere on a spherical Gaussian surface concentric with the distribution. For a spherical surface of radius r,
\Phi={∮}_{S}{\mathbf{\vec{\text{E} } } }_{P}\cdot\mathbf{\hat{\text{n} } }\,dA={E}_{P}{∮}_{S}\,dA={E}_{P}\,4\pi{r}^{2}.According to Gauss’s law, the flux through a closed surface is equal to the total charge enclosed within the closed surface divided by the permittivity of vacuum {\varepsilon}_{0}. Let {q}_{\text{enc} } be the total charge enclosed inside the distance r from the origin, which is the space inside the Gaussian spherical surface of radius r. This gives the following relation for Gauss’s law:
Register to read the full text
This page shows only part of the content. Register or log in to read it all.
Register / Log in