Electric Field in University Physics

As we showed in the preceding section, the net electric force on a test charge is the vector sum of all the electric forces acting on it, from all of the various source charges, located at their various positions. But what if we use a different test charge, one with a different magnitude, or sign, or both? Or suppose we have a dozen different test charges we wish to try at the same location? We would have to calculate the sum of the forces from scratch. Fortunately, it is possible to define a quantity, called the electric field, which is independent of the test charge. It only depends on the configuration of the source charges, and once found, allows us to calculate the force on any test charge.

Defining a Field

Suppose we have N source charges {q}_{1},{q}_{2},{q}_{3}\text{,}\ldots,{q}_{N}, applying N electrostatic forces on a test charge Q, at displacements {\mathbf{\vec{\text{r} } } }_{1},{\mathbf{\vec{\text{r} } } }_{2},{\mathbf{\vec{\text{r} } } }_{3}\text{,}\ldots,{\mathbf{\vec{\text{r} } } }_{N} from the source charges. The net force on Q is (see )

\begin{aligned}\mathbf{\vec{\text{F} } } & ={\mathbf{\vec{\text{F} } } }_{1}+{\mathbf{\vec{\text{F} } } }_{2}+{\mathbf{\vec{\text{F} } } }_{3}+\cdot s+{\mathbf{\vec{\text{F} } } }_{N} \\ & =\frac{1}{4\pi{\varepsilon}_{0} }(\frac{Q{q}_{1} }{ {r}_{1}^{2} }{\mathbf{\hat{\text{r} } } }_{1}+\frac{Q{q}_{2} }{ {r}_{2}^{2} }{\mathbf{\hat{\text{r} } } }_{2}+\frac{Q{q}_{3} }{ {r}_{3}^{2} }{\mathbf{\hat{\text{r} } } }_{3}+\cdot s+\frac{Q{q}_{N} }{ {r}_{N}^{2} }{\mathbf{\hat{\text{r} } } }_{N}) \\ & =Q[\frac{1}{4\pi{\varepsilon}_{0} }(\frac{ {q}_{1} }{ {r}_{1}^{2} }{\mathbf{\hat{\text{r} } } }_{1}+\frac{ {q}_{2} }{ {r}_{2}^{2} }{\mathbf{\hat{\text{r} } } }_{2}+\frac{ {q}_{3} }{ {r}_{3}^{2} }{\mathbf{\hat{\text{r} } } }_{3}+\cdot s+\frac{ {q}_{N} }{ {r}_{N}^{2} }{\mathbf{\hat{\text{r} } } }_{N})].\end{aligned}

We can rewrite this as

\mathbf{\vec{\text{F} } }=Q\mathbf{\vec{\text{E} } }

where

\mathbf{\vec{\text{E} } }\equiv\frac{1}{4\pi{\varepsilon}_{0} }(\frac{ {q}_{1} }{ {r}_{1}^{2} }{\mathbf{\hat{\text{r} } } }_{1}+\frac{ {q}_{2} }{ {r}_{2}^{2} }{\mathbf{\hat{\text{r} } } }_{2}+\frac{ {q}_{3} }{ {r}_{3}^{2} }{\mathbf{\hat{\text{r} } } }_{3}+\cdot s+\frac{ {q}_{N} }{ {r}_{N}^{2} }{\mathbf{\hat{\text{r} } } }_{N})

or, more compactly,

\mathbf{\vec{\text{E} } }(P)\equiv\frac{1}{4\pi{\varepsilon}_{0} }\overset{N}{\underset{i=1}{\sum} }\frac{ {q}_{i} }{ {r}_{i}^{2} }{\mathbf{\hat{\text{r} } } }_{i}.

This expression is called the electric field at position P=P(x,y,z) of the N source charges. Here, P is the location of the point in space where you are calculating the field and the vectors {\mathbf{\vec{\text{r} } } }_{i} are the displacements from each source to the test point (Figure 5.4.1). Note that we have to impose a coordinate system to solve actual problems.

Figure 5.4.1 Each of these five source charges creates its own electric field at every point in space; shown here are the field vectors at an arbitrary point <span class=P. Like the electric force, the net electric field obeys the superposition principle." loading="lazy"/>
Figure 5.4.1 Each of these five source charges creates its own electric field at every point in space; shown here are the field vectors at an arbitrary point P. Like the electric force, the net electric field obeys the superposition principle.

Register to read the full text

This page shows only part of the content. Register or log in to read it all.

Register / Log in