Comparing Simple Harmonic Motion and Circular Motion

An easy way to model SHM is by considering uniform circular motion. Figure 15.3.1 shows one way of using this method. A peg (a cylinder of wood) is attached to a vertical disk, rotating with a constant angular frequency. Figure 15.3.2 shows a side view of the disk and peg. If a lamp is placed above the disk and peg, the peg produces a shadow. Let the disk have a radius of r=A and define the position of the shadow that coincides with the center line of the disk to be x=0.00\,m. As the disk rotates at a constant rate, the shadow oscillates between x=+A and x=\text{-}A. Now imagine a block on a spring beneath the floor as shown in Figure 15.3.2.

Figure 15.3.1 SHM can be modeled as rotational motion by looking at the shadow of a peg on a wheel rotating at a constant angular frequency.
Figure 15.3.1 SHM can be modeled as rotational motion by looking at the shadow of a peg on a wheel rotating at a constant angular frequency.

Figure 15.3.2 Light shines down on the disk so that the peg makes a shadow. If the disk rotates at just the right angular frequency, the shadow follows the motion of the block on a spring. If there is no energy dissipated due to nonconservative forces, the block and the shadow will oscillate back and forth in unison. In this figure, four snapshots are taken at four different times. (a) The wheel starts at <span class=\theta={0}^{o} and the shadow of the peg is at x=+A, representing the mass at position x=+A. (b) As the disk rotates through an angle \theta=\omega t, the shadow of the peg is between x=+A and x=0. (c) The disk continues to rotate until \theta={90}^{0}, at which the shadow follows the mass to x=0. (d) The disk continues to rotate, the shadow follows the position of the mass." loading="lazy"/>
Figure 15.3.2 Light shines down on the disk so that the peg makes a shadow. If the disk rotates at just the right angular frequency, the shadow follows the motion of the block on a spring. If there is no energy dissipated due to nonconservative forces, the block and the shadow will oscillate back and forth in unison. In this figure, four snapshots are taken at four different times. (a) The wheel starts at \theta={0}^{o} and the shadow of the peg is at x=+A, representing the mass at position x=+A. (b) As the disk rotates through an angle \theta=\omega t, the shadow of the peg is between x=+A and x=0. (c) The disk continues to rotate until \theta={90}^{0}, at which the shadow follows the mass to x=0. (d) The d

Register to read the full text

This page shows only part of the content. Register or log in to read it all.

Register / Log in