Matter most commonly exists as a solid, liquid, or gas; these states are known as the three common phases of matter. We will look at each of these phases in detail in this section.
Solids are rigid and have specific shapes and definite volumes. The atoms or molecules in a solid are in close proximity to each other, and there is a significant force between these molecules. Solids will take a form determined by the nature of these forces between the molecules. Although true solids are not incompressible, it nevertheless requires a large force to change the shape of a solid. In some cases, the force between molecules can cause the molecules to organize into a lattice as shown in Figure 14.1.1. The structure of this three-dimensional lattice is represented as molecules connected by rigid bonds (modeled as stiff springs), which allow limited freedom for movement. Even a large force produces only small displacements in the atoms or molecules of the lattice, and the solid maintains its shape. Solids also resist shearing forces. (Shearing forces are forces applied tangentially to a surface, as described in Static Equilibrium and Elasticity.)
Liquids and gases are considered to be fluids because they yield to shearing forces, whereas solids resist them. Like solids, the molecules in a liquid are bonded to neighboring molecules, but possess many fewer of these bonds. The molecules in a liquid are not locked in place and can move with respect to each other. The distance between molecules is similar to the distances in a solid, and so liquids have definite volumes, but the shape of a liquid changes, depending on the shape of its container. Gases are not bonded to neighboring atoms and can have large separations between molecules. Gases have neither specific shapes nor definite volumes, since their molecules move to fill the container in which they are held (Figure 14.1.1).
Liquids deform easily when stressed and do not spring back to their original shape once a force is removed. This occurs because the atoms or molecules in a liquid are free to slide about and change neighbors. That is, liquids flow (so they are a type of fluid), with the molecules held together by mutual attraction. When a liquid is placed in a container with no lid, it remains in the container. Because the atoms are closely packed, liquids, like solids, resist compression; an extremely large force is necessary to change the volume of a liquid.
In contrast, atoms in gases are separated by large distances, and the forces between atoms in a gas are therefore very weak, except when the atoms collide with one another. This makes gases relatively easy to compress and allows them to flow (which makes them fluids). When placed in an open container, gases, unlike liquids, will escape.
In this chapter, we generally refer to both gases and liquids simply as fluids, making a distinction between them only when they behave differently. There exists one other phase of matter, plasma, which exists at very high temperatures. At high temperatures, molecules may disassociate into atoms, and atoms disassociate into electrons (with negative charges) and protons (with positive charges), forming a plasma. Plasma will not be discussed in depth in this chapter because plasma has very different properties from the three other common phases of matter, discussed in this chapter, due to the strong electrical forces between the charges.
Suppose a block of brass and a block of wood have exactly the same mass. If both blocks are dropped in a tank of water, why does the wood float and the brass sink (Figure 14.1.2)? This occurs because the brass has a greater density than water, whereas the wood has a lower density than water.
Density is an important characteristic of substances. It is crucial, for example, in determining whether an object sinks or floats in a fluid.
Density
The average density of a substance or object is defined as its mass per unit volume,
\rho=\frac{m}{V}where the Greek letter \rho (rho) is the symbol for density, m is the mass, and V is the volume.
The SI unit of density is {\text{kg/m} }^{\text{3} }. Table 14.1.1 lists some representative values. The cgs unit of density is the gram per cubic centimeter, {\text{g/cm} }^{3}, where
1\,\text{g}\text{/}{\text{cm} }^{3}=1000\,\text{kg}\text{/}{\text{m} }^{3}.The metric system was originally devised so that water would have a density of 1\,{\text{g/cm} }^{3}, equivalent to {10}^{3\,}\,{\text{kg/m} }^{3}. Thus, the basic mass unit, the kilogram, was first devised to be the mass of 1000 mL of water, which has a volume of 1000\,{\text{cm} }^{3}.
Table 14.1.1 Densities of Some Common Substances
Solids (0.0^\circ\text{C}) Liquids (0.0^\circ\text{C}) Gases (0.0^\circ\text{C}, 101.3 kPa)
Substance;\mathbf{\rho({\text{kg/m} }^{3})};Substance;\mathbf{\rho({\text{kg/m} }^{3})};Substance;\mathbf{\rho({\text{kg/m} }^{3})}
Aluminum;2.70\,\times\,{10}^{3};Benzene;8.79\,\times\,{10}^{2};Air;1.29\,\times\,{10}^{0}
Bone;1.90\,\times\,{10}^{3};Blood;1.05\,\times\,{10}^{3};Carbon dioxide;1.98\,\times\,{10}^{0}
Brass;8.44\,\times\,{10}^{3};Ethyl alcohol;8.06\,\times\,{10}^{2};Carbon monoxide;1.25\,\times\,{10}^{0}
Concrete;2.40\,\times\,{10}^{3};Gasoline;6.80\,\times\,{10}^{2};Helium;1.80\,\times\,{10}^{-1}
Copper;8.92\,\times\,{10}^{3};Glycerin;1.26\,\times\,{10}^{3};Hydrogen;9.00\,\times\,{10}^{-2}
Cork;2.40\,\times\,{10}^{2};Mercury;1.36\,\times\,{10}^{4};Methane;7.20\,\times\,{10}^{-1}
Earth’s crust;3.30\,\times\,{10}^{3};Olive oil;9.20\,\times\,{10}^{2};Nitrogen;1.25\,\times\,{10}^{0}
Glass;2.60\,\times\,{10}^{3};—;—;Nitrous oxide;1.98\,\times\,{10}^{0}
Gold;1.93\,\times\,{10}^{4};—;—;Oxygen;1.43\,\times\,{10}^{0}
Granite;2.70\,\times\,{10}^{3}
Iron;7.86\,\times\,{10}^{3}
Lead;1.13\,\times\,{10}^{4}
Oak;7.10\,\times\,{10}^{2}
Pine;3.73\,\times\,{10}^{2}
Platinum;2.14\,\times\,{10}^{4}
Polystyrene;1.00\,\times\,{10}^{2}
Tungsten;1.93\,\times\,{10}^{4}
Uranium;1.87\,\times\,{10}^{4}
As you can see by examining Table 14.1.1, the density of an object may help identify its composition. The density of gold, for example, is about 2.5 times the density of iron, which is about 2.5 times the density of aluminum. Density also reveals something about the phase of the matter and its substructure. Notice that the densities of liquids and solids are roughly comparable, consistent with the fact that their atoms are in close contact. The densities of gases are much less than those of liquids and solids, because the atoms in gases are separated by large amounts of empty space. The gases are displayed for a standard temperature of US0.0^\circ\text{C} and a standard pressure of 101.3 kPa, and there is a strong dependence of the densities on temperature and pressure. The densities of the solids and liquids displayed are given for the standard temperature of US0.0^\circ\text{C} and the densities of solids and liquids depend on the temperature. The density of solids and liquids normally increase with decreasing temperature.
Table 14.1.2 shows the density of water in various phases and temperature. The density of water increases with decreasing temperature, reaching a maximum at US4.0^\circ\text{C,} and then decreases as the temperature falls below US4.0^\circ\text{C}. This behavior of the density of water explains why ice forms at the top of a body of water.
Table 14.1.2 Densities of Water
Substance \rho({\text{kg/m} }^{3})
Ice (0^\circ\text{C});9.17\,\times\,{10}^{2}
Water (0^\circ\text{C});9.998\,\times\,{10}^{2}
Water (4^\circ\text{C});1.000\,\times\,{10}^{3}
Register to read the full text
This page shows only part of the content. Register or log in to read it all.
Register / Log in