Stress, Strain, and Elastic Modulus

A model of a rigid body is an idealized example of an object that does not deform under the actions of external forces. It is very useful when analyzing mechanical systems—and many physical objects are indeed rigid to a great extent. The extent to which an object can be perceived as rigid depends on the physical properties of the material from which it is made. For example, a ping-pong ball made of plastic is brittle, and a tennis ball made of rubber is elastic when acted upon by squashing forces. However, under other circumstances, both a ping-pong ball and a tennis ball may bounce well as rigid bodies. Similarly, someone who designs prosthetic limbs may be able to approximate the mechanics of human limbs by modeling them as rigid bodies; however, the actual combination of bones and tissues is an elastic medium.

For the remainder of this chapter, we move from consideration of forces that affect the motion of an object to those that affect an object’s shape. A change in shape due to the application of a force is known as a deformation. Even very small forces are known to cause some deformation. Deformation is experienced by objects or physical media under the action of external forces—for example, this may be squashing, squeezing, ripping, twisting, shearing, or pulling the objects apart. In the language of physics, two terms describe the forces on objects undergoing deformation: stress and strain.

Stress is a quantity that describes the magnitude of forces that cause deformation. Stress is generally defined as force per unit area. When forces pull on an object and cause its elongation, like the stretching of an elastic band, we call such stress a tensile stress. When forces cause a compression of an object, we call it a compressive stress. When an object is being squeezed from all sides, like a submarine in the depths of an ocean, we call this kind of stress a bulk stress (or volume stress). In other situations, the acting forces may be neither tensile nor compressive, and still produce a noticeable deformation. For example, suppose you hold a book tightly between the palms of your hands, then with one hand you press-and-pull on the front cover away from you, while with the other hand you press-and-pull on the back cover toward you. In such a case, when deforming forces act tangentially to the object’s surface, we call them ‘shear’ forces and the stress they cause is called shear stress.

The SI unit of stress is the pascal (Pa). When one newton of force presses on a unit surface area of one meter squared, the resulting stress is one pascal:

\text{one pascal}=1.0\,\text{Pa}=\frac{1.0\,\text{N} }{1.0\,{\text{m} }^{2} }.

In the Imperial system of units, the unit of stress is ‘psi,’ which stands for ‘pound per square inch’ ({\text{lb/in} }^{2}). Another unit that is often used for bulk stress is the atm (atmosphere). Conversion factors are

\begin{aligned}1\,\text{psi}=6895\,\text{Pa}\quad\text{and}\quad1\,\text{Pa}=1.450\,\times\,{10}^{-4}\text{psi} \\ 1\,\text{atm}=1.013\,\times\,{10}^{5}\text{Pa}=14.7\,\text{psi.}\end{aligned}

An object or medium under stress becomes deformed. The quantity that describes this deformation is called strain. Strain is given as a fractional change in either length (under tensile stress) or volume (under bulk stress) or geometry (under shear stress). Therefore, strain is a dimensionless number. Strain under a tensile stress is called tensile strain, strain under bulk stress is called bulk strain (or volume strain), and that caused by shear stress is called shear strain.

The greater the stress, the greater the strain; however, the relation between strain and stress does not need to be linear. Only when stress is sufficiently low is the deformation it causes in direct proportion to the stress value. The proportionality constant in this relation is called the elastic modulus. In the linear limit of low stress values, the general relation between stress and strain is

\text{stress}=\text{(elastic modulus)}\,\times\,\text{strain.}

As we can see from dimensional analysis of this relation, the elastic modulus has the same physical unit as stress because strain is dimensionless.

We can also see from that when an object is characterized by a large value of elastic modulus, the effect of stress is small. On the other hand, a small elastic modulus means that stress produces large strain and noticeable deformation. For example, a stress on a rubber band produces larger strain (deformation) than the same stress on a steel band of the same dimensions because the elastic modulus for rubber is two orders of magnitude smaller than the elastic modulus for steel.

The elastic modulus for tensile stress is called Young’s modulus; that for the bulk stress is called the bulk modulus; and that for shear stress is called the shear modulus. Note that the relation between stress and strain is an observed relation, measured in the laboratory. Elastic moduli for various materials are measured under various physical conditions, such as varying temperature, and collected in engineering data tables for reference (Table 12.3.1). These tables are valuable references for industry and for anyone involved in engineering or construction. In the next section, we discuss strain-stress relations beyond the linear limit represented by, in the full range of stress values up to a fracture point. In the remainder of this section, we study the linear limit expressed by.

Table 12.3.1 Approximate Elastic Moduli for Selected Materials

Material Young’s modulus \times\,{10}^{10}\text{Pa} Bulk modulus \times\,{10}^{10}\text{Pa} Shear modulus \times\,{10}^{10}\text{Pa}

Aluminum;7.0;7.5;2.5

Bone (tension);1.6;0.8;8.0

Bone (compression);0.9

Brass;9.0;6.0;3.5

Brick;1.5

Concrete;2.0

Copper;11.0;14.0;4.4

Crown glass;6.0;5.0;2.5

Granite;4.5;4.5;2.0

Hair (human);1.0

Hardwood;1.5;—;1.0

Iron;21.0;16.0;7.7

Lead;1.6;4.1;0.6

Marble;6.0;7.0;2.0

Nickel;21.0;17.0;7.8

Polystyrene;3.0

Silk;6.0

Spider thread;3.0

Steel;20.0;16.0;7.5

Acetone;—;0.07

Ethanol;—;0.09

Glycerin;—;0.45

Mercury;—;2.5

Water;—;0.22

Tensile or Compressive Stress, Strain, and Young’s Modulus

Register to read the full text

This page shows only part of the content. Register or log in to read it all.

Register / Log in