Thus far in the chapter, we have extensively addressed kinematics and dynamics for rotating rigid bodies around a fixed axis. In this final section, we define work and power within the context of rotation about a fixed axis, which has applications to both physics and engineering. The discussion of work and power makes our treatment of rotational motion almost complete, with the exception of rolling motion and angular momentum, which are discussed in Angular Momentum. We begin this section with a treatment of the work-energy theorem for rotation.
Now that we have determined how to calculate kinetic energy for rotating rigid bodies, we can proceed with a discussion of the work done on a rigid body rotating about a fixed axis. Figure 10.8.1 shows a rigid body that has rotated through an angle d\theta from A to B while under the influence of a force \mathbf{\vec{F} }. The external force \mathbf{\vec{F} } is applied to point P, whose position is \mathbf{\vec{r} }, and the rigid body is constrained to rotate about a fixed axis that is perpendicular to the page and passes through O. The rotational axis is fixed, so the vector \mathbf{\vec{r} } moves in a circle of radius r, and the vector d\mathbf{\vec{s} } is perpendicular to \mathbf{\vec{r} }.
From, we have
\mathbf{\vec{s} }=\mathbf{\vec{\theta} }\,\times\,\mathbf{\vec{r} }.Thus,
d\mathbf{\vec{s} }=d(\mathbf{\vec{\theta} }\,\times\,\mathbf{\vec{r} })=d\mathbf{\vec{\theta} }\,\times\,\mathbf{\vec{r} }+d\mathbf{\vec{r} }\,\times\,\mathbf{\vec{\theta} }=d\mathbf{\vec{\theta} }\,\times\,\mathbf{\vec{r} }.Note that d\mathbf{\vec{r} } is zero because \mathbf{\vec{r} } is fixed on the rigid body from the origin O to point P. Using the definition of work, we obtain
W=\int\sum\mathbf{\vec{F} }\cdot d\mathbf{\vec{s} }=\int\sum\mathbf{\vec{F} }\cdot(d\mathbf{\vec{\theta} }\,\times\,\mathbf{\vec{r} })=\int d\mathbf{\vec{\theta} }\cdot(\mathbf{\vec{r} }\,\times\,\sum\mathbf{\vec{F} })where we used the identity \mathbf{\vec{a} }\cdot(\mathbf{\vec{b} }\,\times\,\mathbf{\vec{c} })=\mathbf{\vec{b} }\cdot(\mathbf{\vec{c} }\,\times\,\mathbf{\vec{a} }). Noting that (\mathbf{\vec{r} }\,\times\,\sum\vec{F})=\sum\mathbf{\vec{\tau} }, we arrive at the expression for the rotational work done on a rigid body:
W=\int\sum\mathbf{\vec{\tau} }\cdot d\mathbf{\vec{\theta} }.The total work done on a rigid body is the sum of the torques integrated over the angle through which the body rotates. The incremental work is
dW=(\underset{i}{\sum}{\tau}_{i})d\thetawhere we have taken the dot product in, leaving only torques along the axis of rotation. In a rigid body, all particles rotate through the same angle; thus the work of every external force is equal to the torque times the common incremental angle d\theta. The quantity (\underset{i}{\sum}{\tau}_{i}) is the net torque on the body due to external forces.
Similarly, we found the kinetic energy of a rigid body rotating around a fixed axis by summing the kinetic energy of each particle that makes up the rigid body. Since the work-energy theorem {W}_{i}=\Delta{K}_{i} is valid for each particle, it is valid for the sum of the particles and the entire body.
Work-Energy Theorem for Rotation
The work-energy theorem for a rigid body rotating around a fixed axis is
{W}_{AB}={K}_{B} - {K}_{A}where
K=\frac{1}{2}I{\omega}^{2}and the rotational work done by a net force rotating a body from point A to point B is
{W}_{AB}=\overset{ {\theta}_{B} }{\underset{ {\theta}_{A} }{\int} }(\underset{i}{\sum}{\tau}_{i})d\theta.We give a strategy for using this equation when analyzing rotational motion.
Work-Energy Theorem for Rotational Motion
Let’s look at two examples and use the work-energy theorem to analyze rotational motion.
Power always comes up in the discussion of applications in engineering and physics. Power for rotational motion is equally as important as power in linear motion and can be derived in a similar way as in linear motion when the force is a constant. The linear power when the force is a constant is P=\mathbf{\vec{F} }\cdot\mathbf{\vec{v} }. If the net torque is constant over the angular displacement, simplifies and the net torque can be taken out of the integral. In the following discussion, we assume the net torque is constant. We can apply the definition of power derived in Power to rotational motion. From Work and Kinetic Energy, the instantaneous power (or just power) is defined as the rate of doing work,
P=\frac{dW}{dt}.If we have a constant net torque, becomes W=\tau\theta and the power is
P=\frac{dW}{dt}=\frac{d}{dt}(\tau\theta)=\tau\frac{d\theta}{dt}or
Register to read the full text
This page shows only part of the content. Register or log in to read it all.
Register / Log in