Center of Mass in University Physics

We have been avoiding an important issue up to now: When we say that an object moves (more correctly, accelerates) in a way that obeys Newton’s second law, we have been ignoring the fact that all objects are actually made of many constituent particles. A car has an engine, steering wheel, seats, passengers; a football is leather and rubber surrounding air; a brick is made of atoms. There are many different types of particles, and they are generally not distributed uniformly in the object. How do we include these facts into our calculations?

Then too, an extended object might change shape as it moves, such as a water balloon or a cat falling (Figure 9.6.1). This implies that the constituent particles are applying internal forces on each other, in addition to the external force that is acting on the object as a whole. We want to be able to handle this, as well.

Figure 9.6.1 As the cat falls, its body performs complicated motions so it can land on its feet, but one point in the system moves with the simple uniform acceleration of gravity.
Figure 9.6.1 As the cat falls, its body performs complicated motions so it can land on its feet, but one point in the system moves with the simple uniform acceleration of gravity.

The problem before us, then, is to determine what part of an extended object is obeying Newton’s second law when an external force is applied and to determine how the motion of the object as a whole is affected by both the internal and external forces.

Be warned: To treat this new situation correctly, we must be rigorous and completely general. We won’t make any assumptions about the nature of the object, or of its constituent particles, or either the internal or external forces. Thus, the arguments will be complex.

Internal and External Forces

Suppose we have an extended object of mass M, made of N interacting particles. Let’s label their masses as {m}_{j}, where j=1,2,3,\ldots,N. Note that

M=\overset{N}{\underset{j=1}{\sum} }{m}_{j}.

If we apply some net external force {\mathbf{\vec{F} } }_{\text{ext} } on the object, every particle experiences some “share” or some fraction of that external force. Let:

{\mathbf{\vec{f} } }_{j}^{\text{ext} }=\,\text{the fraction of the external force that the}\,j\text{th particle experiences.}

Notice that these fractions of the total force are not necessarily equal; indeed, they virtually never are. (They can be, but they usually aren’t.) In general, therefore,

{\mathbf{\vec{f} } }_{1}^{\text{ext} }\ne{\mathbf{\vec{f} } }_{2}^{\text{ext} }\ne\cdot s\ne{\mathbf{\vec{f} } }_{N}^{\text{ext} }.

Next, we assume that each of the particles making up our object can interact with (apply forces on) every other particle of the object. We won’t try to guess what kind of forces they are; but since these forces are the result of particles of the object acting on other particles of the same object, we refer to them as internal forces {\mathbf{\vec{f} } }_{j}^{\text{int} }; thus:

{\mathbf{\vec{f} } }_{j}^{\text{int} }= the net internal force that the jth particle experiences from all the other particles that make up the object.

Now, the net force, internal plus external, on the jth particle is the vector sum of these:

{\mathbf{\vec{f} } }_{j}={\mathbf{\vec{f} } }_{j}^{\text{int} }+{\mathbf{\vec{f} } }_{j}^{\text{ext} }.

where again, this is for all N particles; j=1,2,3,\ldots,N.

As a result of this fractional force, the momentum of each particle gets changed:

\begin{aligned}{\mathbf{\vec{f} } }_{j} & = & \frac{d{\mathbf{\vec{p} } }_{j} }{dt} \\ {\mathbf{\vec{f} } }_{j}^{\text{int} }+{\mathbf{\vec{f} } }_{j}^{\text{ext} } & = & \frac{d{\mathbf{\vec{p} } }_{j} }{dt}.\end{aligned}

The net force \mathbf{\vec{F} } on the object is the vector sum of these forces:

\begin{aligned}{\mathbf{\vec{F} } }_{\text{net} } & =\overset{N}{\underset{j=1}{\sum} }({\mathbf{\vec{f} } }_{\vec{j} }^{\mathbf{int} }+{\mathbf{\vec{f} } }_{\vec{j} }^{\mathbf{ext} }) \\ & =\overset{N}{\underset{j=1}{\sum} }{\mathbf{\vec{f} } }_{\vec{j} }^{\mathbf{int} }+\overset{N}{\underset{j=1}{\sum} }{\mathbf{\vec{f} } }_{\vec{j} }^{\mathbf{ext} }.\end{aligned}

This net force changes the momentum of the object as a whole, and the net change of momentum of the object must be the vector sum of all the individual changes of momentum of all of the particles:

{\mathbf{\vec{F} } }_{\text{net} }=\overset{N}{\underset{j=1}{\sum} }\frac{d{\mathbf{\vec{p} } }_{j} }{dt}.

Combining and gives

\overset{N}{\underset{j=1}{\sum} }{\mathbf{\vec{f} } }_{j}^{\text{int} }+\overset{N}{\underset{j=1}{\sum} }{\mathbf{\vec{f} } }_{j}^{\text{ext} }=\overset{N}{\underset{j=1}{\sum} }\frac{d{\mathbf{\vec{p} } }_{j} }{dt}.

Let’s now think about these summations. First consider the internal forces term; remember that each {\mathbf{\vec{f} } }_{j}^{\text{int} } is the force on the jth particle from the other particles in the object. But by Newton’s third law, for every one of these forces, there must be another force that has the same magnitude, but the opposite sign (points in the opposite direction). These forces do not cancel; however, that’s not what we’re doing in the summation. Rather, we’re simply mathematically adding up all the internal force vectors. That is, in general, the internal forces for any individual part of the object won’t cancel, but when all the internal forces are added up, the internal forces must cancel in pairs. It follows, therefore, that the sum of all the internal forces must be zero:

\overset{N}{\underset{j=1}{\sum} }{\mathbf{\vec{f} } }_{j}^{\text{int} }=0.

(This argument is subtle, but crucial; take plenty of time to completely understand it.)

For the external forces, this summation is simply the total external force that was applied to the whole object:

\overset{N}{\underset{j=1}{\sum} }{\mathbf{\vec{f} } }_{j}^{\text{ext} }={\mathbf{\vec{F} } }_{\text{ext} }.

As a result,

{\mathbf{\vec{F} } }_{\text{ext} }=\overset{N}{\underset{j=1}{\sum} }\frac{d{\mathbf{\vec{p} } }_{j} }{dt}.

This is an important result. tells us that the total change of momentum of the entire object (all N particles) is due only to the external forces; the internal forces do not change the momentum of the object as a whole. This is why you can’t lift yourself in the air by standing in a basket and pulling up on the handles: For the system of you + basket, your upward pulling force is an internal force.

Force and Momentum

Remember that our actual goal is to determine the equation of motion for the entire object (the entire system of particles). To that end, let’s define:

{\mathbf{\vec{p} } }_{\text{CM} }= the total momentum of the system of N particles (the reason for the subscript will become clear shortly)

Then we have

{\mathbf{\vec{p} } }_{\text{CM} }\equiv\overset{N}{\underset{j=1}{\sum} }{\mathbf{\vec{p} } }_{j},

and therefore can be written simply as

Register to read the full text

This page shows only part of the content. Register or log in to read it all.

Register / Log in