Solving Problems with Newton’s Laws

Success in problem solving is necessary to understand and apply physical principles. We developed a pattern of analyzing and setting up the solutions to problems involving Newton’s laws in Newton’s Laws of Motion; in this chapter, we continue to discuss these strategies and apply a step-by-step process.

Problem-Solving Strategies

We follow here the basics of problem solving presented earlier in this text, but we emphasize specific strategies that are useful in applying Newton’s laws of motion. Once you identify the physical principles involved in the problem and determine that they include Newton’s laws of motion, you can apply these steps to find a solution. These techniques also reinforce concepts that are useful in many other areas of physics. Many problem-solving strategies are stated outright in the worked examples, so the following techniques should reinforce skills you have already begun to develop.

Applying Newton’s Laws of Motion

  1. Identify the physical principles involved by listing the givens and the quantities to be calculated.
  2. Sketch the situation, using arrows to represent all forces.
  3. Determine the system of interest. The result is a free-body diagram that is essential to solving the problem.
  4. Apply Newton’s second law to solve the problem. If necessary, apply appropriate kinematic equations from the chapter on motion along a straight line.
  5. Check the solution to see whether it is reasonable.

Let’s apply this problem-solving strategy to the challenge of lifting a grand piano into a second-story apartment. Once we have determined that Newton’s laws of motion are involved (if the problem involves forces), it is particularly important to draw a careful sketch of the situation. Such a sketch is shown in Figure 6.1.1(a). Then, as in Figure 6.1.1(b), we can represent all forces with arrows. Whenever sufficient information exists, it is best to label these arrows carefully and make the length and direction of each correspond to the represented force.

Figure 6.1.1 (a) A grand piano is being lifted to a second-story apartment. (b) Arrows are used to represent all forces: <span class=\mathbf{\vec{T} } is the tension in the rope above the piano, {\mathbf{\vec{F} } }_{\text{T} } is the force that the piano exerts on the rope, and \mathbf{\vec{w} } is the weight of the piano. All other forces, such as the nudge of a breeze, are assumed to be negligible. (c) Suppose we are given the piano’s mass and asked to find the tension in the rope. We then define the system of interest as shown and draw a free-body diagram. Now {\mathbf{\vec{F} } }_{\text{T} } is no longer shown, because it is not a force acting on the system of interest; rather, {\mathbf{\vec{F} } }_{\text{T} } acts on the outside world. (d) Showing only the arrows, the head-to-tail method of addition is used. It is apparent that if the piano is stationary, \mathbf{\vec{T} }=\text{-}\mathbf{\vec{w} }." loading="lazy"/>
Figure 6.1.1 (a) A grand piano is being lifted to a second-story apartment. (b) Arrows are used to represent all forces: \mathbf{\vec{T} } is the tension in the rope above the piano, {\mathbf{\vec{F} } }_{\text{T} } is the force that the piano exerts on the rope, and \mathbf{\vec{w} } is the weight of the piano. All other forces, such as the nudge of a breeze, are assumed to be negligible. (c) Suppose we are given the piano’s mass and asked to find the tension in the rope. We then define the system of interest as shown and draw a free-body diagram. Now {\mathbf{\vec{F} } }_{\text{T} } is no longer shown, because it is not a force acting on the system of interest; rather, {\mathbf{\vec{F} } }_{\text{T} } acts on the outside world. (d) Showing only the arrows, the head-to-tail method of addition is used. It is apparent that if the piano is stationary, \mathbf{\vec{T} }=\text{-}\mathbf{\vec{w} }.

As with most problems, we next need to identify what needs to be determined and what is known or can be inferred from the problem as stated, that is, make a list of knowns and unknowns. It is particularly crucial to identify the system of interest, since Newton’s second law involves only external forces. We can then determine which forces are external and which are internal, a necessary step to employ Newton’s second law. (See Figure 6.1.1(c).) Newton’s third law may be used to identify whether forces are exerted between components of a system (internal) or between the system and something outside (external). As illustrated in Newton’s Laws of Motion, the system of interest depends on the question we need to answer. Only forces are shown in free-body diagrams, not acceleration or velocity. We have drawn several free-body diagrams in previous worked examples. Figure 6.1.1(c) shows a free-body diagram for the system of interest. Note that no internal forces are shown in a free-body diagram.

Register to read the full text

This page shows only part of the content. Register or log in to read it all.

Register / Log in