ECS Journal of Solid State Science and Technology

ECS Journal of Solid State Science and Technology is a monthly peer-reviewed journal that The Electrochemical Society launched in 2012 for the chemistry and physics of solid-state materials and devices.《ECS 固体科学与技术杂志》是一份月刊，美国电化学学会于 2012 年创办，面向固体材料与器件的化学与物理研究。

Its 2025 Journal Impact Factor is 2.4, its CiteScore is 4.5, and it publishes roughly 339 papers a year from a base of about 8,900 citations.2025 年的影响因子为 2.4，CiteScore 为 4.5，每年刊出约 339 篇论文，累计被引约 8900 次。

Scope

• The remit is the chemistry and physics of solid-state materials and the devices built from them, and both experimental and theoretical papers are taken.该刊的范围是固体材料及其器件的化学与物理，实验研究与理论研究都在收稿之列。

• Six technical areas organise that remit, namely dielectric science and materials, electronic materials and processing, electronic and photonic devices and systems, luminescence and display materials, sensors, and carbon nanostructures.六个技术方向构成这一范围，分别是介电科学与材料，电子材料与工艺，电子与光子器件及系统，发光与显示材料，传感器，碳纳米结构。

• Dielectric science and materials covers thin films, interfaces and the electrical behaviour of insulating layers, from leakage and breakdown to long-term reliability in transistors and storage capacitors.介电科学与材料方向涵盖薄膜，界面以及绝缘层的电学行为，从漏电与击穿到晶体管与存储电容中的长期可靠性。

• Electronic materials and processing takes in deposition, etching, lithography, planarisation, interconnect and packaging, with attention to how a process behaves on a production line.电子材料与工艺方向涉及沉积，刻蚀，光刻，平坦化，互连与封装，并关注工艺在生产线上的实际表现。

• Electronic and photonic devices and systems covers transistors, memories, power devices, light emitters and detectors, together with the circuits and modules built around them.电子与光子器件及系统方向覆盖晶体管，存储器，功率器件，发光与探测器件，以及围绕它们搭建的电路与模块。

• Luminescence and display materials, devices and processing deals with phosphors, quantum dots, organic emitters and the display architectures that put them to work.发光与显示材料，器件及工艺方向处理荧光粉，量子点，有机发光材料，以及把它们投入使用的显示架构。

• Sensors form a separate area, taking in chemical, gas, biological and physical sensing along with the transduction and packaging that make a device usable outside a laboratory.传感器自成一个方向，涵盖化学，气体，生物与物理传感，以及让器件走出实验室的换能与封装技术。

• Carbon nanostructures and devices brings graphene, carbon nanotubes, diamond and related two-dimensional materials into a single editorial stream inside the journal.碳纳米结构与器件方向把石墨烯，碳纳米管，金刚石与相关二维材料纳入刊内同一条编辑流程。

• Theory and computation carry the same weight as measurement, so first-principles calculation, device simulation and process modelling all appear in the table of contents.理论与计算和实验测量同等重要，第一性原理计算，器件模拟与工艺建模都会出现在目录里。

• Characterisation is treated as part of the argument, and a paper is expected to link what an instrument reports to a mechanism that explains it.表征被视为论证的一部分，论文需要把仪器给出的结果与解释它的机理联系起来。

• Manufacturing relevance counts for a good deal, so a study showing how a material survives a real process line is valued alongside one that reports a record number.与制造的相关性颇受看重，说明材料能否经得住真实工艺线的研究，和报告纪录数值的研究一样受重视。

• Work whose centre of gravity is electrochemical rather than solid-state is sent to the society's other journals, which keeps the boundary of this title visible to authors.重心在电化学而不在固体物理的稿件会被转往学会的其他期刊，作者因此能看清这份刊物的边界。

• Topical focus issues collect papers on one subject, from wide-bandgap semiconductors to display phosphors, while ordinary submissions continue to be handled in parallel.专题聚焦号围绕单一主题汇集论文，范围从宽禁带半导体到显示荧光粉，常规投稿同时照常处理。

• Review articles appear once a field has matured enough to need stocktaking, and they pass the same technical scrutiny as a research paper.某一领域成熟到需要盘点时会出现综述文章，它们要经过与研究论文相同的技术审查。

History

• The Electrochemical Society was founded in 1902, and for a century its solid-state papers appeared inside the Journal of The Electrochemical Society before this title arrived in 2012.美国电化学学会创立于 1902 年，在 2012 年本刊出现之前的一个世纪里，它的固体科学论文一直刊发在《Journal of The Electrochemical Society》上。

• Volume 1 opened in 2012 with the society's own imprint in Pennington, New Jersey, and the editorial office has stayed there ever since.第 1 卷于 2012 年面世，出版印记落在新泽西州彭宁顿，编辑部此后一直设在那里。

• The National Library of Medicine files the title as ECS journal of solid state science and technology : JSS and shortens it to ECS J Solid State Sci Technol.美国国立医学图书馆把它按「ECS journal of solid state science and technology : JSS」编目，缩写栏写作「ECS J Solid State Sci Technol」。

• Two serial numbers are in use, 2162-8769 for the print edition and 2162-8777 for the electronic one, and both appear on every article page.刊号有两个，印本为 2162-8769，电子本为 2162-8777，两者都印在文章页上。

• Publication is now handled by IOP Publishing on the society's behalf, and manuscripts move through IOPscience while the older jss.ecsdl.org address still forwards readers.出版工作现由 IOP Publishing 代表学会执行，稿件在 IOPscience 上流转，旧的 jss.ecsdl.org 地址仍会把读者带去新平台。

• Twelve issues appear each year, and the numbering has reached volume 14 for 2025 and volume 15 for 2026.每年出版 12 期，卷号到 2025 年为第 14 卷，2026 年为第 15 卷。

• The impact factor fell from 2.483 in 2022 to 1.8 in 2023, recovered to 2.2 in 2024 and stood at 2.4 in 2025.影响因子 2022 年为 2.483，2023 年降至 1.8，2024 年回到 2.2，2025 年为 2.4。

• The 2025 Journal Citation Reports place it third quartile in materials science, multidisciplinary at 326 of 472 titles, and in physics, applied at 123 of 191.2025 年的期刊引证报告把它排在材料科学综合类第 326 位（共 472 种），物理应用类第 123 位（共 191 种），两者都在第三四分位。

• For 2025 the counts were 8,901 citations and 339 articles, with a cited half-life of 4.8 years and a Journal Citation Indicator of 0.39.2025 年的统计为总被引 8901 次，年发文 339 篇，被引半衰期 4.8 年，期刊引文指标 0.39。

• The five-year impact factor of 2.2 sits close to the 2025 figure, which suggests that recent papers are not cited less often than the older stock.五年影响因子为 2.2，与 2025 年的 2.4 相差不大，近期论文的被引并不比旧文逊色。

• Access is hybrid, with subscriptions covering the whole list and an open access option for single articles, which gave a gold open access share of 12.73 percent in 2025.访问方式是混合模式，订阅覆盖全部内容，单篇文章也可选择开放获取，2025 年金色开放获取占比为 12.73%。

• Coverage in PubMed is recorded as selected citations only, while the science citation index expanded lists the title in full, which matters for authors who need both a medical and a materials record.PubMed 的收录被记为「selected citations only」，科学引文索引则完整收录，这对同时需要医学与材料数据库记录的作者有实际影响。

• It belongs to a family that also includes the Journal of The Electrochemical Society, ECS Advances and ECS Sensors Plus, each with its own editors and scope.它与《Journal of The Electrochemical Society》，ECS Advances 与 ECS Sensors Plus 同属一个刊物家族，各有自己的编辑与范围。

• No change of title has been recorded since volume 1, and reference lists everywhere use the abbreviation ECS J Solid State Sci Technol.自第 1 卷以来没有更名记录，各处的参考文献都使用 ECS J Solid State Sci Technol 这一缩写。

Editors

• Fan Ren of the University of Florida is editor-in-chief, and he oversees the six technical areas rather than sitting inside one of them.Fan Ren 是主编，任职于佛罗里达大学，他统管六个技术方向，并不专属于其中某一个。

• Yu-Lin Wang of the Institute of Nanoengineering and Microsystems in Hsinchu handles the sensors area, where chemical, biological and gas sensing papers arrive.Yu-Lin Wang 任职于新竹的纳米工程与微系统研究所，负责传感器方向，化学，生物与气体传感的稿件由他经手。

• Peter Mascher of McMaster University in Hamilton, Ontario, takes dielectric science and materials, the area closest to the journal's original core.Peter Mascher 任职于安大略省汉密尔顿的麦克马斯特大学，负责介电科学与材料方向，这也是与刊物原有核心最接近的一块。

• Travis Anderson of the University of Florida looks after electronic materials and processing, a field that covers process integration as much as new compounds.Travis Anderson 任职于佛罗里达大学，负责电子材料与工艺方向，这一方向既管新化合物，也管工艺集成。

• Won Bin Im of Hanyang University in Seoul covers luminescence and display materials, devices and processing, including phosphor chemistry and emitter design.Won Bin Im 任职于首尔的汉阳大学，负责发光与显示材料，器件及工艺方向，荧光粉化学与发光体设计都在其中。

• Jihyun Kim of Seoul National University handles carbon nanostructures and devices, the stream in which graphene, nanotube and diamond papers are assessed.Jihyun Kim 任职于首尔大学，负责碳纳米结构与器件方向，石墨烯，纳米管与金刚石的稿件在这一支线上评审。

• Tae-Yeon Seong of Korea University covers electronic and photonic devices and systems, from transistors and memories to detectors and the modules around them.Tae-Yeon Seong 任职于高丽大学，负责电子与光子器件及系统方向，从晶体管与存储器到探测器及其模块。

• Manuscripts are routed to the editor who owns the relevant area, and that editor chooses the referees instead of passing the file to a central desk.稿件会交给主管相应方向的技术编辑，由这位编辑挑选审稿人，而不经过统一的中间台。

• Review follows the society's single-anonymised model, so referees stay unknown to the authors while author names and affiliations remain on the manuscript.评审采用学会的单匿名方式，审稿人对作者保密，作者的姓名与单位则保留在稿件上。

• The publisher reports an average of 18 days from submission to first decision and about 10 days from acceptance to online publication, a lag it attributes largely to proofing.出版方公布的均值是投稿到首次决定 18 天，接收到在线出版约 10 天，后一段耗时主要取决于作者校样。

• The board is deliberately small and mostly North American and East Asian, with members in the United States, Canada, Taiwan and South Korea.编委规模刻意保持精简，成员主要来自北美与东亚，分布在美国，加拿大，中国台湾与韩国。

• There is no separate advisory council, so the editor-in-chief and the six technical editors together carry the whole editorial load.刊物不另设顾问委员会，主编与六位技术编辑共同承担全部编务。